Videos

Book your unit in online and have it repaired by Injectronics, the leaders in electronic and mechatronic reman and repair services.

Injectronics will analyze and repair this common issue with the ECM of the 2007-2014 Mercedes-Benz C180 & W204

Common faults for affected vehicles include failure to start, no ECM communication via the scan tool, no spark, blowing of the supply fuse to the ECM, ignition coils, etc., and no earth to the fuel pump.

Knowing exactly which components to send with your module is critical learn more about this common issue and repair.

The Mercedes Benz CVT Module can be repaired, maintaining the vehicle programming. Typically, the vehicle will present with slipping gears, failure to select drive and the vehicle in limp home mode.

Heavy Duty modules are fast tracked to repair specialists dedicated to this segment within Injectronics, keeping this equipment moving.

Injectronics technicians can repair ECM's from the Heavy Duty industry. This week we look at the Cummins Celect ECM

With so many of these vehicles on our roads, it's good to know this repair is both fast and cost effective with Injectronics.

A common failure of the ABS module, fitted to many Mitsubishi Lancers, Injectronics can repair both the electronic and mechanical components of this unit.

A very common module used in Kenworth cabins, the Climate Control module repair by Injectronics comes with a fast turn around and 12 month warranty.

Injectronics discusses common faults and the repair of BMW X5 and X6 Park Brake Modules

Injectronics discuss the ICC or interior command centre faults and offer the solutions.

Listen to the Injectronics technicians discuss the commonly seen faults in the Ford Ranger BCM.

Have you faced a no start issue on a Ford Ranger or Mazda BT-50? There is a common fault you should be aware of..learn more in this video.

The Mazda CX9 ECM can be repaired, maintaining the vehicle programming. Typically, the vehicle will present with a engine misfire and P0300 DTC, failed ignition coils, or no start. Replacing the faulty ignition coil, and the P0300 code remains - the ECM has been damaged.

So you've diagnosed a fault with your electronic or mechatronic module and need help. Book your unit in online and have it repaired by Injectronics, the leaders in electronic and mechatronic reman and repair services. Branches located around Australia and also in Auckland New Zealand. Learn more at www.injectronics.com.au or www.injectronics.co.nz